3/4 inch torque wrench
Torque wrench 3/4 inch
TRQWRNCH-3/4IN-(80-400NM)
Register now and access more than 125,000 products
- Trigger accuracy of +/- 3 % tolerance from the set scale value
- Non-slip two-component handle
- Easy-to-read, large double scale in N.m and lbf-ft.
- The torque can be easily and precisely adjusted by turning the handle
- The torque wrench does not have to be released after use, i.e. it does not have to be reset to the lowest scale value
- Settings can be securely locked and easily unlocked using the locking knob
- Clear acoustic and tangible torque triggering for precise screwing operations
- High-quality ratchet tool for use in confined spaces
- Includes declaration of conformity and serial number
- Torque wrenches are precision tools that must be checked regularly using suitable measuring equipment and adjusted if necessary
- We recommend annual calibration through the Würth repair service (Master Service) after 12 months or 5,000 screwing operations. The interval begins with the first use of the torque wrench
Datasheets(X)
Wide range of possible applications for controlled tightening of screws and nuts, for example, for repair and maintenance work on vehicles/commercial vehicles or for industry
Tip size | 3/4 inch |
Min./max. torque measuring range | 80-400 Nm |
Min./max. torque measuring range (inches) | 60-290 lbf.ft |
Number of turns from min. to max. torque value | 15 |
Design | With 60 teeth - 6 degree angle of rotation |
Scale value torque main scale | 10 Nm |
Torque measuring accuracy | +/- 3 % |
Suitable for right-hand tightening | Yes |
Suitable for left-hand tightening | Yes |
Standards | ISO 6789-1 |
Length (L1) | 685 mm |
Length of lever (L2) | 589 mm |
Handle length (L3) | 167 mm |
Ratchet head height (B1) | 24 mm |
Ratchet head height with square (B2) | 47 mm |
Handle diameter (D1) | 37 mm |
Ratchet head width (D2) | 51 mm |