Acrylic thinner For 2-component acrylic products and 1-component thick coat lacquers

Name: Acrylic thinner For 2-component acrylic products and 1-component thick coat lacquers
Brand: Würth
SKU: 08234000

Acrylic thinner
THINNER-ACRYLIC-NORMAL-5LTR

Art.-no. 08234000

All versions

Prices for customers after login

Acrylic thinner For 2-component acrylic products and 1-component thick coat lacquers

Art.-no. 08234000

Prices for customers after login

Quantity

x 1 pcs

Exclusively for trade customers

Login/Register
Call customer service: +976 76117940

To dilute or to adjust the viscosity of 2-component top coats and 2-component clear coats for painting.

The usage instructions are recommendations based on the tests we have conducted and based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet

Certificates/ Documents

Application area

For all 2-component acrylic products as well as 1-component universal primer and 1-component thick coat lacquer

Instructions

Add the thinner to the paint in the required quantity. Note the mixture ratios of the individual products.

Contents	5 l
Container	Tinplate canister
Chemical basis	Xylol
Smell/fragrance	Aromatic
Colour	Colourless
Min. flashing point	25 °C
Density	0.875 g/cm³
Conditions to maintain shelf life from production	cool and dry storage area, no exposure to sunlight, 15°C to 25°C
Bio-degradable	Yes
Shelf life from production	24 Month
AOX-free	Yes

Suitable glove:

Product

Description

Nitrile chemical protective glove With cotton velour finish inside

Description:

Permeation level: 3

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.