Adhesive sealing tape EURASOL<SUP>®</SUP> DUS - ADHSEALTPE-1SIDE-(EURASOL-DUS)-60MM

Adhesive sealing tape EURASOL<SUP>®</SUP> DUS - ADHSEALTPE-1SIDE-(EURASOL-DUS)-60MM - 1

Adhesive sealing tape EURASOL<SUP>®</SUP> DUS - ADHSEALTPE-1SIDE-(EURASOL-DUS)-60MM - 2

Adhesive sealing tape EURASOL<SUP>®</SUP> DUS - ADHSEALTPE-1SIDE-(EURASOL-DUS)-60MM - 3

Adhesive sealing tape EURASOL^® DUS

Name: Adhesive sealing tape EURASOL ® DUS
Brand: Würth
SKU: 0992750050

Adhesive sealing tape EURASOL DUS
ADHSEALTPE-1SIDE-(EURASOL-DUS)-60MM
EURASOL

Art.-no. 0992750050

EAN 4046778541006

All versions

Similar products

Prices for customers after login

Adhesive sealing tape EURASOL^® DUS

Art.-no. 0992750050

Prices for customers after login

Quantity

x 6 pcs

Exclusively for trade customers

Login/Register
Call customer service: +976 76117940

Special adhesive tape for the permanent wind- and condensation-proof bonding of underlay membranes and roof protection films. With a UV resistance of eight weeks, it is especially suitable for outdoor use.

Fleece overlay protects against weather influences

Ideal for outdoor use

Vapour-permeable membrane backing material

Maximum protection against condensation water forming

Excellent initial and final adhesion

Ensures permanently windproof bonding

Perfect visual matching to roof protection film

Repairs and seams cannot be seen

Notice

Eurasol^® DUS is ideal for bonding Wütop^® roof protection film and has been tested on these films. For this reason, we recommend using Wütop^® films to achieve optimum results.

Please observe our building-related warranty conditions.

German Energy Saving Ordinance (EnEV)

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

Application area

Permanent bonding of roof protection films. Bonding of overlapping sections of these films and connections and openings. Ideally suited for outdoor use (UV resistance for 8 weeks).

Instructions

The application surface must be dry and free from grease, chips and dust. Ensure that no standing water can build up within the bonded area. Do not subject the adhered tape to long-term tension.

Fix Eurasol® DUS to the overlap seam by removing just a few centimetres of the masking paper. On removing the masking paper, the adhesive tape is glued over the full length of the overlapping seam by pressing on it. Please ensure sufficient contact pressure. After adhesion, cut the adhesive tape with a knife.

Backing material	Vapour permeable roof underlay
Adhesive base	Modified acrylate
Width	60 mm
Length	25 m
Min./max. processing temperature	0 to 50 °C
Min./max. temperature resistance	-40 to 90 °C
Shelf life from production/conditions	Unlimited / in closed original packaging at + 5°C to + 23°C and 50% to 60% humidity

Additive article:

Product

Description

Quantity

Price
/PU

Underlay membrane and roof protection film WÜTOP<SUP>® </SUP>Trio

Underlay membrane and roof protection film WÜTOP® Trio

ROOFUNDRLAYSTR-TRIO-L50M-W1,5M-75SM

WUETOP

Art.-no. 0681001001

All-round roof protection film

x 75 m²

Roof protection film and sarking membrane WÜTOP<SUP>® </SUP>Quadro

Roof protection film and sarking membrane WÜTOP® Quadro

ROOFUNDRLAYSTR-QUADRO-L50M-W1,5M-75QM

WUETOP

Art.-no. 0681001002

WÜTOP Quadro is a highly vapour-permeable roof protection film and sarking membrane. It can be laid directly on heat insulation or formwork in all ventilated and non-ventilated pitched roofs.

x 75 m²

Packaging unit

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.

Structure of our article number

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Information on price display

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

Quantity

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).