Compressor K 290
Compressor, K 290
COMPR-EL-K290
MASTER
Register now and access more than 125,000 products
An optimum ratio between extraction and supply quantities allows effective and cost-effective working procedures
Control panel with manometer, pressure regulator and quick-action couplings
- High level of user comfort
- No more stooping
Pressure switch and filter unit with condensate outlet
Motor protection, start-up relief and regulated, clean compressed air
Large fan impellers and recooling ribs
Optimum cooling and heat dissipation for longer service life
Solid rubber wheels, support feet, protective panel and hooks for winding up the cord
- Robust, compact and stable machine
- Particularly suitable for mobile use
The compressor has two quick-action couplings
- One coupling for regulated pressure and one for full, unregulated tank pressure
- Straightforward connection of a pneumatic hose
How to choose the right compressor
- Determine the air consumption per minute of the pneumatic devices to be connected from the information on the catalogue pages or the operating instructions. But be careful: Normally, average values under normal working conditions with breaks are specified. In continuous operation, these values are many times higher. With nail guns and staplers, the air consumption per operation must be multiplied by the number of operations per minute, e.g. 2.2 l/impact x 40 impacts/min. = 88 l/min.
- Compare the consumption of the pneumatic devices with the delivery rate of the compressor.
- Select a compressor with a reserve of at least 30–50%. The greater the reserve, the longer the service life and the more efficient the compressor.
The output of a generator must be 4-5 times as high.
The units are not subject to regular testing by the German TÜV association
Datasheets(X)
Ideal for professional use on construction sites and in the workshop
Type description | K 290 |
Motor output | 2.2 kW |
Max. pressure | 10 bar |
Tank capacity | 20 l |
Intake air capacity | 284 l/min |
Nominal voltage | 230 V/AC |
Frequency | 50 Hz |
Rotation speed | 2850 rpm |
Min./max. temperature conditions | 5 to 40 °C |
Cable length | 1.5 m |
Length x width x height | 480 x 410 x 800 mm |
Number of cylinders | 1 PCS |
Number of quick-action couplings | 3 PCS |
Sound-pressure level | 79 dB |
Weight of machine | 33 kg |
Last viewed
Long-life & speed diamond wet core bit 1 1/4 inch
1/2 inch socket wrenches Assortment of 21 pieces
Thread die HSS DIN EN 22568 for standard metric ISO threads
Easylock grease coupling
Circlip For shafts, standard design, shape A DIN 471, spring steel, phosphated and oiled
Thread die HSS DIN EN 22568 for standard metric ISO threads
Allen key, hexagon socket with ball head Extra-long design
Round nose pliers DIN ISO 5745
Simplex soft face hammer With steel housing
Double ring ratchet spanner assortment Black