Conical drive-in nipple DIN 71412, shape A, steel, zinc-plated
DIN 71412 steel zinc plated H shape A
NPL-DIN71412-A-H1-(A3F)-10
Register now and access more than 125,000 products
Drive-in grease nipples are manufactured oversized. Depending on the material, installation tests may be necessary.
Datasheets(X)
CAD data (available after login)
Drive-in grease nipples are only suitable for low pressures.
 | |
Standards | DIN 71412 |
Form | A, H1 |
Material | Steel |
Surface | Zinc plated |
Diameter of tenon (d1) | 10 mm |
Length (l1) | 15 mm |
Length of tenon (l2) | 5.5 mm |
Guideline values for hole diameters | 10 mm |
RoHS-compliant | Yes |
Last viewed
Telescopic aluminium plank
C 6.3 TX bit (1/4 inch) C 6.3 (1/4 inch)
Circlip For shafts, standard design, shape A DIN 471, spring steel, phosphated and oiled
Timing tool set suitable for VW Group 1.8-2.0 TFSI with timing chain 10 pieces
Multi-purpose drill bit multipack MFD-S 3-surface shaft - 75 years of Würth 9 pieces
Tap wrench DIN 1814 Performance, adjustable
Roofing trowel, cat tongue shape
1/2 inch socket wrenches Assortment of 21 pieces
1/2 inch socket wrench insert metric, hexagon, short
Smart car flat-blade windscreen wiper