DC1 digital callipers - CAL-DGT-DC1-(0-150MM)

DC1 digital callipers - CAL-DGT-DC1-(0-150MM) - 1

DC1 digital callipers - CAL-DGT-DC1-(0-150MM) - 2

DC1 digital callipers - CAL-DGT-DC1-(0-150MM) - 3

DC1 digital callipers - CAL-DGT-DC1-(0-150MM) - 4

DC1 digital callipers - CAL-DGT-DC1-(0-150MM) - 5

DC1 digital callipers - CAL-DGT-DC1-(0-150MM) - 6

DC1 digital callipers - CAL-DGT-DC1-(0-150MM) - 7

DC1 digital callipers - CAL-DGT-DC1-(0-150MM) - 8

DC1 digital callipers - CAL-DGT-DC1-(0-150MM) - 9

DC1 digital callipers

Name: DC1 digital callipers
Brand: Würth
SKU: 0715761215

Digital callipers DC1
CAL-DGT-DC1-(0-150MM)

Art.-no. 0715761215

EAN 4099618095061

All versions

Specification

Ergonomic digital callipers with calibration certificate and a measuring range of 150 mm

Long service life and reliable measurements due to reinforced plastic housing, hardened and ground measuring jaw

Very easy-to-read display, even from wider viewing angles

Two-button operation, on/off, zero/switching inch/mm

Flat depth gauge for precise depth measurements

Easy transfer of measurement results using the locking screw on the top to lock

Tool-free battery replacement, including R2032 battery

Automatic shutdown after 20 minutes

Thread table on the rear of the housing

Supplied with factory calibration certificate

Notice

Keep the callipers clean and dry. Fluid can damage the slide

Surfaces should be carefully cleaned with cotton fabric

Never use petrol, acetone or other organic solvents

Never apply voltage to parts of the digital callipers (e.g. engraving with an electric pin) as this may damage the circuit

Application

Application areaFor mechanical engineering, metalworking, workshops, quality control etc.

Instructions

Read the operating instructions before using the callipers

Clean and dry the digital callipers and the objects to be measured

Technical information

Absolute length measuring accuracy	0.03 mm
Digit increment	0.01 mm
Max. length measuring range	150 mm
Length of jaw	40 mm
Length of measuring tip	24 mm

Documents

Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

Accessory

Additive article:

Product

Description

Quantity

Price
/PU

Lithium button cell 3 V

RDCLL-LITHIUM-CR2032-3V

Art.-no. 0827082032

Low level of self-discharge

x 100 pcs

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with v

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).