Diamond cutting disc, turbo, construction site
Diamond cutting disc constr. Turbo
CUTDISC-DIA-TURBO-CNST-BR22,2-D125
Register now and access more than 125,000 products
Closed cutting edge
Very clean cut
Embossing main blade (embossed) with Ø 180 and 230 mm
- Very smooth running
- Disc does not wobble or vibrate
Cooling holes
Improved heat dissipation
- Diamond cutting discs become blunt at excessively high rotation speeds and wear too rapidly at insufficient peripheral surface speeds
- If ease of cutting is lost (indicated by heavy sparking), resharpen the disc in abrasive material, e.g. sandstone, with several cuts
- Cut larger workpiece cross-sections into several sections (swing cut)
- Work without applying pressure – the weight of the machine is sufficient. Increased pressure causes increased wear.
- Diamond cutting discs are designed for straight cutting. Cutting curves deforms the blade and results in core cracks and segment tear-offs – risk of injury!
- Despite the level of safety offered by the tool, always wear safety glasses and clothing while working
- Observe the information on the label (max. rotation speed), the restrictions of use and the safety instructions
- The direction arrow on the disc must match the machine's direction of rotation
- Must not be used for lateral grinding
- Use the appropriate protective hood
- Clamping must be performed only by a trained specialist (do not use force, use clean clamping flanges of the same size, perform a test run)
- If grinding tools are clamped or used incorrectly or are damaged, they represent a danger and may cause serious injury
Datasheets(X)
For angle grinders
For dry and wet cutting
Diameter (Ø) | 125 mm |
Drill hole | 22.23 mm |
Segment height | 7.5 mm |
Segment thickness | 2 mm |
Segment connection | Sintered |
Max. rotation speed | 12200 rpm |
Max. circumferential speed | 80 m/s |
Last viewed
Ratchet combination wrench Multi-profile for five screw head drives
Three-way nozzle
Mixer nozzle for WIT-PE 500 and WIT-VM 250 cartridges
Pro 5 multi-purpose charger
System case 8.4.2
Long-life & speed diamond wet core bit 1 1/4 inch
Machinist's hammer German design in accordance with DIN 1041
1/2 inch socket wrenches Assortment of 21 pieces
Allen key
1/2" socket wrench insert For TX screws, short