Die stocks DIN 225
Threading die holder DIN 225
HOLD-THRDIE-DIN225-SZ1-(M3-M4)
Register now and access more than 125,000 products
Durable design and secure fastening
Housing made of die-cast zinc with knurled clamping screws and 90° tip for mounting die.
Datasheets(X)
The die is placed in the die holder at the height of the middle screw. The screws are tightened with a screwdriver. The die is placed vertically on the workpiece. Can be used on both sides. When cutting, sufficient cutting oil must be added. After two revolutions, the cut can be broken by briefly turning back.
Material | Malleable cast iron |
Internal diameter x height | 20 x 5 mm |
Last viewed
Cordless hammer drill ABH 18 COMPACT M-CUBE
1-inch impact socket wrench insert hexagon, metric, short
wSafe® 2000 pneumatic safety coupling With female thread
1/2 inch impact socket wrench insert hexagon, metric, short
Hex head screw with shank ISO 4014, steel 8.8, zinc-plated, blue passivated (A2K)
Multi-bit screwdriver ASSY®mat 50 With HS 16
Corvus nubuck leather S3 safety shoe
Stretch X winter softshell jacket
1-inch impact socket wrench insert hexagon, metric, short
MultiFit Latex protective glove