Digital multimeter X-Tended TRMS
Digital multimeter X-Tended TRMS
MULTIM-DGT-(X-TENDED-TRMS)
Register now and access more than 125,000 products
Measuring instrument protection
Inputs with fuses (use only original fuses)
Extremely easy to read
Digits 11 mm
Display range
- 5000 digits
- Saving the display (pause function)
- Min/max function
Easy access to batteries and fuses
Column chart
For quick trend identification
CAT III surge protection
Multifunctional shockproof cover
For positioning the measuring instrument and holding the test tips
Determining the effective value
With non-linear loads (energy-saving fluorescent lamps, dimmers, speed controllers, switching power supplies, etc.), a pure sinusoidal waveform of the supply voltage can rarely be achieved. This distorted signal can cause measurement errors of up to 50%. Therefore, it is recommended to use TRMS measuring instruments that display active current or voltage.
Datasheets(X)
For measurements on battery, alternator, starter, carburetor, ignition coil, capacitor, etc. (some applications require passive AC or AC + DC current clamps, not included)
Display | 5000 Digit with Bargraph |
Min./max. voltage measuring range | 0.5 V/AC-750 V/AC |
Min./max. voltage measuring range 2 | 0.5 V/DC-1000 V/DC |
Min./max. current measuring range | 50 mA/AC/DC-10 A/AC/DC |
Min. voltage measuring range 2 | 0.5 V/DC |
Max. voltage of measuring range 2 | 1000 V/DC |
Max. voltage of measuring range 3 | 600 V/AC/DC |
Min./max. electrical-resistance measuring range | 10 Ohm-50 MOhm |
Min./max. capacity measuring range | 1 nF-50 mF |
Overvoltage protection category | CAT III/600 V |
IP protection class | IP 40 |
Battery designation | 9 V 6LR61 |
Number of rechargeable batteries/batteries | 1 PCS |
Length x width x height | 170 x 80 x 30 mm |

BTRY-ALKALI-BLOCK-9V
Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with v
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2
Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)
Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)
Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.
Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units