Emery cloth wheel
Flap wheel
FLPWHL-G80-30X15X6
Register now and access more than 125,000 products
- Mixed corundum made from synthetic and specially fused corundum
- Abrasive flaps in a synthetic resin core, embedded radial to the axis
- Especially suitable for surface smoothing and fine polishing
At high rotation speeds a coarse grain acts like a finer grain and at low rotation speeds a fine grain acts like a coarser one. Use tools with a low contact pressure; high contact pressure leads to premature wear. With insufficient chip removal, do not increase the contact pressure, but instead use a coarser grain. Pay attention to the direction of rotation! Tools are only suitable for clockwise rotation.
Datasheets(X)
Fine sanding and polishing work in tool and mould construction, working smaller and hard-to-reach surfaces in container and apparatus construction, treating fittings made of heavy and light metals as well as stainless and acid-resistant steels.
Forged steel, malleable iron, grey cast iron, carbon steel, deep drawing steel, steel strip, injection-moulded zinc, non-ferrous metals, Cr-Ni and other stainless steels, wood
Diameter x width x shaft diameter | 30 x 15 x 6 mm |
Grid size | 80 |
Min./max. circumferential speed | 20-28 m/s |
Material of abrasive medium | Normal corundum |
Material to be processed | Forged steel, Malleable cast iron, Grey cast iron, C-steel, Deep-drawn steel, Steels bands, Injection-moulded zinc, Non-ferrous metal, Cr-Ni and other stainless steels, Wood |
Shank diameter | 6 mm |
Last viewed
Checker plate box
3/8 inch socket wrench insert metric, hexagon, short
3/8" socket wrench insert For external TX screws, short
Point chisel with SDS-plus drive arbour
Standard manual cartridge gun
Twist Drill bit HSCO ASME B94.11M TYPE RN
Watertight plug housing TE Superseal 1.5 Series assortment 440 pieces in system case 4.4.1
Laser receiver Universal LRU 18
Rucksack
VDE round-nose pliers DIN ISO 5745, IEC 60900