Flat washer without chamfer DIN EN ISO 7089, steel, hot-dip galvanised (hdg)
ISO 7089 steel 200 HV hot dip galvanized
WSH-ISO7089-200HV-(HDG)-20
Register now and access more than 125,000 products
- Replaces DIN 125
- Washers with hardness class 200 HV can be used in combination with bolts in strength class ≤ 8.8 and nuts in strength class ≤ 8
Specified dimensions not binding. Subject to technical changes!
Datasheets(X)
 | |
Suitable for screw thread | M20 |
Form | 0 - not applicable |
Internal diameter (d1) | 21 mm |
Outer diameter (d2) | 37 mm |
Thickness (h1) | 3.000 mm |
Standards | ISO 7089 |
Material | Steel |
Vickers hardness, HV | 200 HV |
Surface | Hot dip galvanized |
RoHS-compliant | Yes |
Suitable for | 0 - not applicable |
Last viewed
Power pack Li-ion 12 V with charger and 2 batteries
T-handle screwdriver with bit strip, 10 pcs and PH2 bit
Water pump pliers DIN ISO 8976
High Power battery
Pneumatic blind rivet gun PNG 102
Plastic tap DN 60 connection
Single wire seal (SEAL) For uninsulated cable connector
Diamond tile dry core bit M14 seat
Hexagon nut DIN 934, steel I6I/I8I, zinc-plated, blue passivated (A2K)
Zinc spray