Flat washer without chamfer DIN EN ISO 7089, steel, hot-dip galvanised (hdg)
ISO 7089 steel 200 HV hot dip galvanized
WSH-ISO7089-200HV-(HDG)-30
Register now and access more than 125,000 products
- Replaces DIN 125
- Washers with hardness class 200 HV can be used in combination with bolts in strength class ≤ 8.8 and nuts in strength class ≤ 8
Specified dimensions not binding. Subject to technical changes!
Datasheets(X)
 | |
Suitable for screw thread | M30 |
Internal diameter (d1) | 31 mm |
Outer diameter (d2) | 56 mm |
Thickness (h1) | 4 mm |
Standards | ISO 7089 |
Material | Steel |
Vickers hardness, HV | 200 HV |
Surface | Hot dip galvanized |
RoHS-compliant | Yes |
Last viewed
Ash handle
Pin punch set 6 pieces
High-gloss polish P20 Plus
System assortment 8.4.1, socket wrenches 3/8 inch VDE 24 pieces
STARLINE® Plus trousers
C 6.3 bit hexagon socket (1/4 inch) with patented POWERDRIV® drive
1/2 inch socket wrench insert metric, hexagon, short
Electrical insulating tape
Stretch X winter softshell jacket
System insert 8.4.1, combination wrench