Welcome to Würth Mongolia For trade customers only

Gearbox oil TRIATHLON® Automatic Ultra

Gear oil, TRIATHLON Automatic Ultra
GEAROIL-(AUTOMATIC-ULTRA)-1LTR
TRIATHLON

Art.-no. 0897420001

Prices for customers after login
Gearbox oil TRIATHLON® Automatic Ultra

Art.-no. 0897420001

Prices for customers after login
Quantity
PU

Exclusively for trade customers

Register now and access more than 125,000 products

High-performance gearbox oil for automatic gearboxes

TRIATHLON gearbox oils are produced and packaged in compliance with the most stringent quality specifications in accordance with DIN EN ISO 9001


  • High level of product safety

  • Comprehensive manufacturer approvals


Only high-quality first raffinates and raw materials are used for TRIATHLON oils


Fulfils key specifications of automotive manufacturers



Outstanding protection against wear, even with extended oil change intervals



High thermal stability and excellent low-temperature properties

Notice

Observe the operating instructions of the vehicle and engine manufacturer for standard and extended oil change intervals.

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications as well as storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by the provision of this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Datasheets(X)

Safety data sheet

Certificates/ Documents

 | 

 | 

Application area

High-performance gearbox oil for automatic transmissions.

Contents

1 l

Type of oil

HC synthesis

Approved for gear oils

GM Dexron IIIH, JASO 1-A, Toyota Type T-II, Toyota Type T-IV, Allison C4, TES 295, Kia SP II, Kia SP III, Mitsubishi SP II, Mitsubishi SP III, Hyundai SP II, Hyundai SP III, Mazda ATF M III, Mazda ATF M V, Honda ATF Z1 (except CVTs), Ford Mercon V, Nissan AT-Matic J Fluid, Nissan AT-Matic D Fluid, Nissan Matic Fluid K

Recommended applications for gear oils

JWS 3309, Chrysler ATF +3, Chrysler ATF +4, MB 236.2, MB 236.5, MB 236.6, MB 236.7, MB 236.9, MB 236.10, Daimler NAG-1, BMW LT 71141, BMW LA 2634, BMW 7045 E, BMW 8072 B, MAN 339 Type Z2, MAN 339 Type V1, ZF-TE-ML 02F, ZF-TE-ML 03D, ZF-TE-ML 04D, ZF-TE-ML 05L, ZF-TE-ML 09, ZF-TE-ML 11A, ZF-TE-ML 11B, ZF-TE-ML 14B, ZF-TE-ML 17C, VW G 052 162, VW G 055 025, Volvo 97340, Volvo 97341, Subaru ATF, Voith H55.6335.xx, Allison TES 295

Shelf life from production

60 Month

Density

0.85 g/cm³

Density conditions

at 15°C

Min. flashing point

210 °C

Pour point

-50 °C

Suitable glove:
 
Product
Description
Nitrile chemical protective glove With cotton velour finish inside
Nitrile chemical protective glove With cotton velour finish inside
Description:
Permeation level: 6
Disposable nitrile glove, extra strong
Disposable nitrile glove, extra strong
Description:
Permeation level: 3
Hard-wearing disposable gloves with excellent chemical protection
Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.
Measured breakthrough time
Permeation level
< 10 min
0
≥ 10 min
1
≥ 30 min
2
≥ 60 min
3
≥ 120 min
4
≥ 240 min
5
≥ 480 min
6

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information