Hammer drill bit Plus Duo-S
Hammer drill bit Duo-S 4-spirals
DRL-HAM-PLUS-4SPRL-D10-L160-WL100MM
Register now and access more than 125,000 products
The optimised tip geometry quickly transports the drilling dust away from the tip and ensures an optimum drilling progress.
Greater durability
The strengthened carbide element with reinforcement sections provides greater durability.
Precise tapping
The special self-centring tip enables precise tapping.
Maximum transmission of impact energy
The large-volume, multi-spiral feed helix enables maximum transmission of the impact energy.
Increased resistance to breakage
Core reinforcement of the drill bit helix makes this possible.
D 4.8 and 6.3: Special drill bit for SFS spike fastening system. Please note: With long drill bit lengths, pre-drill using a short drill bit of the same diameter.
Iron reinforcements may only be drilled through with permission from a structural engineer.
Datasheets(X)
Diameter (Ø) | 10.0 mm |
Length | 160 mm |
Working length | 100 mm |
Last viewed
Stretch Evolution softshell jacket
Easylock grease coupling
Safety boot S1P New Poseidon
KL draw bolt For M12-M63 and PG9-PG48 hole punchers
System assortment 2.4.1, socket wrench 3/8 inch 12 pieces
Diesel particulate filter cleaner
Flatblade Pro car windscreen wiper
STARLINE® waist jacket
3/4-inch impact socket wrench assortment 8 pieces
Square washers Hot-dip galvanised