Hexagonal nut ISO 4032 steel 10, hot-dip galvanised (HDG)
ISO 4032 steel 10 hot dip galvanized
NUT-HEX-ISO4032-10-(HDG)-WS46-M30
Register now and access more than 125,000 products
ISO 4032 replaces DIN 934 | There is no similarity | Nominal diameter changed | Some nut heights changed | Width across flats changed for M10, M12, M14, M22 | Only for standard thread | Fine thread moved to ISO 8673.
Datasheets(X)
 | |
Thread type x nominal diameter (D) | M30 |
Height (m1) | 25.6 mm |
External drive (s1) | WS46 |
Standards | ISO 4032 |
Material | Steel |
Property class | 10 |
Hardness category | 0 - not applicable |
Surface | Hot dip galvanized |
Regulated area | 0 - not applicable |
RoHS-compliant | Yes |
Last viewed
Polishing pads
Collated nails and gas cartridge NG CS-2/3 HFB
Roof protection film and sarking membrane WÜTOP® Quadro
1/4 inch ball-head ratchet 3 in 1
Primer brush For window installation
Cylinder saw assortment HSS
1/2" socket wrench insert metric, bi-hex, short
Chipping hammer MH 11-XE
Branch connector non-detachable For branch connections in any desired position
1/2 inch socket wrench insert metric, hexagon, short