High-strength bearing retainer - BEARRTNGCOMPD-DOS-HSTRTH-25G

High-strength bearing retainer - BEARRTNGCOMPD-DOS-HSTRTH-25G - 1

High-strength bearing retainer - BEARRTNGCOMPD-DOS-HSTRTH-25G - 2

High-strength bearing retainer

Name: High-strength bearing retainer
Brand: Würth
SKU: 0893603025

Bearing retaining compound high-strength
BEARRTNGCOMPD-DOS-HSTRTH-25G

Art.-no. 0893603025

EAN 4045989343997

All versions

Similar products

Prices for customers after login

High-strength bearing retainer

Art.-no. 0893603025

Prices for customers after login

Quantity

x 1 pcs

Exclusively for trade customers

Login/Register
Call customer service: +976 76117940

For high-strength connection of cylindrical parts subject to high loads

Reliable hardening at low temperatures around 0°C

Assists in winter use

High degree of gap bridging

Completely fills extensive surface roughnesses

Gap filling capacity of 0.15 mm

Even extremely large deviations are cost effective to correct.

Prevents frictional corrosion

The bearings will not seize up.

Resistant to a large number of bases, gases, solvents, oils and fuels

Silicone-free, solvent-free and oil-free

DOS system:

Practical one-handed operation thanks to the clever turn-lock nozzle

One hand always remains free.

Continuously adjustable dispensing system

Dispensing can be adjusted to suit the application, and to keep consumption and costs to a minimum.

No residue material in dispensing neck

Costs optimised thanks to emptying with virtually no remaining product

Notice

The following plastics can be affected in the event of prolonged exposure: ABS, celluloid, polystyrene, polycarbonate (Macrolon), PMMA (Plexiglas), polysulfone, SAN (lurane, Tyril), Vinidur, vulcanised fibre, and painted surfaces. We always recommend that you conduct your own tests.

NSF-registered, Class S5, bearing retaining compound

NSF-tested in accordance with NSF/ANSI 61 for use in service water and drinking water up to +82°C

The usage instructions are recommendations based on the tests we have conducted and on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. If our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products.

Please observe the technical data sheet!

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet

Certificates/ Documents

Application area

For high-strength securing of cylindrical joining parts such as bushings and sleeves as supplied, ball bearings, oil-impregnated sinter bronze, gears, bolts, shaft and hub connections exposed to high loads.

The bearing retaining compound is designed for use in the automotive and commercial vehicle industry, in metalworking and tool manufacturing, shipbuilding, mechanical engineering and engine construction, electrical and electronics construction, food, beverage, pharmaceutical and paper industries, etc.

Instructions

This liquid plastic cures when in contact with metal in the absence of oxygen. The contact surfaces must be dry, dust-free and grease-free. Moisten the adhesive surfaces sufficiently and put them together immediately.

For more information, please refer to the technical data sheet.

Weight of content	25 g
Chemical basis	Methacrylic acid ether
Colour	Green
Density/conditions	1.07 g/cm³ / in accordance with DIN EN ISO 2811-1
Suitable for max. thread	M12
Max. gap-filling ability	0.15 mm
Min./max. viscosity /conditions	100-200 mPas / at 25°C, Brookfield RVT, spindle 2/20 rpm
Fully hardening/curing conditions	Exclusion of oxygen and contact with metal (copper or iron ions)
Min./max. initial strength	5-10 min
Min./max. functional strength	30-40 min
Min./max. final strength	3 h-6 h
Min./max. processing temperature	5 to 35 °C
Min./max. temperature conditions	-55 to 150 °C
Min. flashing point	90 °C
Min. prevail torque	35 Nm
Conditions for prevail torque	DIN EN 15865
Shelf life from production/conditions	18 Month / at room temperature
Solvent-free	Yes
Silicone-free	Yes

Suitable glove:

Product

Description

Chemical protective glove chloroprene

Description:

Permeation level: 4

Heavy-duty design

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.