Lubricating grease WGF 130

Name: Lubricating grease WGF 130
Brand: Würth
SKU: 0893530

Lubricating grease WGF 130
GRSE-ROLLBEAR-HIGHPERFORMANCE-WGF130-1KG

Art.-no. 0893530

EAN 4099617005351

All versions

Prices for customers after login

Lubricating grease WGF 130

Art.-no. 0893530

Prices for customers after login

Quantity

Exclusively for trade customers

Login/Register
Call customer service: +976 76117940

High-performance lubricating grease

Lithium-soap grease with molybdenum sulphide (MoS2)

Forms a solid lubricating film on the running surfaces under load from the grease itself

Significantly improves run-in conditions

Ensures additional emergency running lubrication

Reduces friction and thus prevents excessive wear

Extends lubricating period

Protects against corrosion

Resistant to water

Temperature resistant from -30°C to +130°C, briefly up to +150°C

Colour: Black

Consistency as per NLGI: 2

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet

Certificates/ Documents

Application area

High-performance grease for lubricating roller and slide bearings of all kinds.

Instructions

Clean and degrease the lubricating points. Then apply the grease to the desired layer thickness.

Chemical basis	Lithium 12 hydroxystearate
Oil basis	Mineral oil
Colour	Black
Density	1 g/cm³
Smell/fragrance	Oil
Min. dripping point	180 °C
Min. temperature conditions	-30 °C
Max. temperature resistance	130 °C
Min. temperature resistance	-30 °C
Max. temperature conditions	150 °C
Max. short-term temperature resistance	150 °C
Kinematic oil basis viscosity	280 cSt
Behaviour in the presence of water	1-90
Conditions for behaviour in the presence of water	in accordance with DIN 51807-1
NLGI grade	2
Worked penetration	265 to 295 x 0.1 mm
Worked penetration conditions	in accordance with DIN ISO 2137
Silicone-free	Yes
Acid-free	Yes
Resin-free	Yes
AOX-free	Yes
Resistance against	Water
Contents	1 l
Weight of content	1000 g
Shelf life from production	36 Month

Suitable glove:

Product

Description

Nitrile chemical protective glove With cotton velour finish inside

Description:

Permeation level: 2

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.