MFD-S combi stone drill bit assortment 10 pieces
Stone drill combi MFD-S assortment 10 pieces
DRL-STN-SET-COMBI-MFDS-(D5-10MM)-10PCS
ZEBRA
Register now and access more than 125,000 products
Stoneware drill bit
- Specially developed cemented carbide plate geometry (multi-surface precision grinding)
- No cooling is required
MFD-S multi-purpose drill bit
- Extra-sharp carbide cutting edges with special diamond grinding on all sides
- Outstanding, rapid transport of drilling dust
- PGM tested
For further information, please refer to the individual products.
Porcelain tile drill bit
- Max. rotation speed 200 rpm
- Not suitable for impact drilling. For rotary drilling only.
- Optimum contact pressure: 35-45 kg
- If the recommended drilling speed is observed and the optimum contact pressure applied, but you can no longer hear a "scraping" sound, the drill bit has reached the end of its service life.
- Avoid placing high contact pressure on the drill bit when it is not rotating → Risk of breakage!
- Contact pressure too low and/or drilling speed too high → Drastically reduces the service life!
- Avoid tilting and swivelling movements during the drilling process → Risk of breakage!
- We recommend drilling test holes (ideally in waste material from the tiles to be drilled)
Multi-purpose drill bit MFD-S
Not suitable for impact drilling. For rotary drilling only.
Datasheets(X)
Stoneware drill bit
Rotary drilling in stoneware tiles, tiles, glass (not safety glass) and porcelain. Ideal for electric and cordless drills
MFD-S multi-purpose drill bit
- Rotary drilling in tiles, solid brick, roofing tiles, hollow brick, stone, marble, wood, plastic, metal etc.
- Window installation, drilling through formwork and drilling through hollow-chamber bricks without breakage for a secure anchor hold etc.
Stoneware drill bit
1. Start the hole with point precision, applying light pressure
2. Switch on the drill
3. Apply full contact pressure → "Scraping" sound must be heard
4. Use reduced contact pressure once the tile has been fully penetrated
Number of pieces in assortment/set | 10 PCS |
Tool holding device | 0 - not applicable |
DRL-GENPURP-MFDS-D10-L120-WL80MM
ZEBRA
DRL-GENPURP-MFDS-D5-L85-WL39MM
ZEBRA
DRL-GENPURP-MFDS-D6-L100-WL54MM
ZEBRA
DRL-GENPURP-MFDS-D8-L120-WL80MM
ZEBRA
DRL-TLE-STNWARE-CYL-D10MM
ZEBRA
DRL-TLE-STNWARE-CYL-D5MM
ZEBRA
DRL-TLE-STNWARE-CYL-D6MM
ZEBRA
DRL-TLE-STNWARE-CYL-D8MM
ZEBRAJust leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2
Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)
Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)
Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.
Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
Last viewed
Sealant remover
Techno S3 FLEXITEC® safety boots
High-Power SL4R rechargeable LED head lamp
3/4-inch connector
1/2 inch impact socket wrench insert hexagon, metric, short
Safety test lead with restrictable test tips
BMF workshop cleaner
1/2 inch impact socket wrench insert hexagon, metric, short
Metric combination wrench with POWERDRIV®
Stretch Evolution softshell jacket