Nail HN 101 For use in steel and concrete substrates
Nail HN 101
NL-HN101-27MM
Register now and access more than 125,000 products
Nails with shaft lengths of 72, 90 and 100 mm must be pre-tapped into place with a hammer. Please observe the corresponding device category when selecting your fasteners
Length calculation for nails used on concrete surfaces:
Penetration depth (min. 25 mm/max. 40 mm) + thickness of component to be fastened = nail or shaft length
Length calculation for nails used on steel surfaces (min. 5 mm thick):
Penetration depth (min. 8 mm/max. 12 mm) + thickness of component to be fastened = nail or shaft length
All nails are suitable for secondary attachments (without technical approval). The maximum tensile forces of individual attachments are at the discretion of the user and must be determined with test attachments or pull-out tests.
Datasheets(X)
High-quality nail for steel substructures and concrete substrates (normal weight concrete ≥ C 12/15 ≤ C 50/60) in accordance with DIN EN 206
 | |
Material | Steel |
Surface | Zinc plated |
Design | Smooth |
Head type | Step head |
Shaft length (SL) | 27 mm |
Length (L) | 27 mm |
Shank diameter (Øds) | 3.7 mm |
Head diameter (Ø dk) | 8 mm |
Suitable for device type | Würth BST 350, Hilti DX 2, Würth BST MA-75 (single shot kit for single fixtures), Hilti DX 350, DX 36M, DX 460, DX 5 |
Last viewed
Metric combination wrench with POWERDRIV®
Adjustable open-end wrench
Mini universal saw Can be used with metal and wood saw blade
PU coiled pneumatic hose premium anti-spark
Base S2 FLEXITEC® safety boots
Tap wrench DIN 1814 Performance, adjustable
Pressure gauge bridge For R134a and R1234yf air-conditioning units
AW® C 6.3 bit (1/4 inch) with patented AW tip and colour coding
Brick and tile drill bit box 7 pieces
Techno S3 FLEXITEC® safety boots