Plasterboard plug W-GS Type ZD
Gypsum plstrbrd anchor W-GS w.out centring tip
DWL-(W-GS/Z)-ZD-14,5X33
Register now and access more than 125,000 products
- High die-cast zinc quality
- Attachment via mechanical interlock
- Rapid installation with cordless screwdriver and suitable bit for the relevant screw, with no pre-drilling required.
- Minimal space required behind panel (only 15 mm)
- The component can be attached with wood or chipboard screws.
- For installation, we recommend ASSY®-D screws
- To attach the component, use the ASSY®-D 4.5 mm-diameter plug screw or a wood/particle board screw without drill tip, counter thread or ring thread.
- Use in damp areas in combination with a stainless steel screw
- Type Z/L recommended for use on double panelling
Datasheets(X)
- For attaching light items to gypsum plasterboard, gypsum fibreboard and lightweight panels, ideal in combination with the ASSY®-D 4.5 mm diameter screw.
Type description | W-GS/Z |
Anchor length (l) | 33 mm |
Material | Die-cast zinc |
Required particle-board screw diameter | 4.5 mm |
Hole diameter in component (d Bau) | 6.5 mm |
Minimum component thickness (d) | 9.5 mm |
Max. attachment height (d a) - condition | Dependent on screw length |
Min. temperature resistance | -40 °C |
Max. temperature resistance | 80 °C |
Edge clearance (a r) | 50 mm |
Centre-to-centre distance (a) | 100 mm |
Last viewed
Thinsulate® knitted hat
Plasterboard plug W-GS Type ZD made from die-cast zinc
Underbody seal cup gun For applying solvent- and water-based gravel guard, undercoating and cavity sealing products
Spray hose
System assortment 8.4.1, screwdriver 25 pieces
Cleaning brush for concrete with M6 connecting thread
Valve key I
Hand-held rivet pliers
Percussion drill SB 16-E
Flat blade fuse ATO ISO 8820-3