Welcome to Würth Mongolia For trade customers only
Plasterboard plug W-GS Type ZD made from die-cast zinc - DWL-(W-GS/Z)-ZD-14,5X33 Plasterboard plug W-GS Type ZD made from die-cast zinc - DWL-(W-GS/Z)-ZD-14,5X33 Plasterboard plug W-GS Type ZD made from die-cast zinc - DWL-(W-GS/Z)-ZD-14,5X33 Plasterboard plug W-GS Type ZD made from die-cast zinc - DWL-(W-GS/Z)-ZD-14,5X33 Plasterboard plug W-GS Type ZD made from die-cast zinc - DWL-(W-GS/Z)-ZD-14,5X33 Plasterboard plug W-GS Type ZD made from die-cast zinc - DWL-(W-GS/Z)-ZD-14,5X33 Plasterboard plug W-GS Type ZD made from die-cast zinc - DWL-(W-GS/Z)-ZD-14,5X33
Plasterboard plug W-GS Type ZD made from die-cast zinc - DWL-(W-GS/Z)-ZD-14,5X33 - 1
Plasterboard plug W-GS Type ZD made from die-cast zinc - DWL-(W-GS/Z)-ZD-14,5X33 - 2
Plasterboard plug W-GS Type ZD made from die-cast zinc - DWL-(W-GS/Z)-ZD-14,5X33 - 3
Plasterboard plug W-GS Type ZD made from die-cast zinc - DWL-(W-GS/Z)-ZD-14,5X33 - 4
Plasterboard plug W-GS Type ZD made from die-cast zinc - DWL-(W-GS/Z)-ZD-14,5X33 - 5
Plasterboard plug W-GS Type ZD made from die-cast zinc - DWL-(W-GS/Z)-ZD-14,5X33 - 6
Plasterboard plug W-GS Type ZD made from die-cast zinc - DWL-(W-GS/Z)-ZD-14,5X33 - 7

Plasterboard plug W-GS Type ZD made from die-cast zinc

Plasterboard plug W-GS
DWL-(W-GS/Z)-ZD-14,5X33

Art.-no. 09032521
EAN 4046777158144
All versions

Prices for customers after login
Plasterboard plug W-GS Type ZD made from die-cast zinc

Art.-no. 09032521

Prices for customers after login
Quantity
PU

Exclusively for trade customers

Register now and access more than 125,000 products

For quick and easy installation in gypsum plasterboard/gypsum fibreboard, without pre-drilling and without additional setting tool
  • High die-cast zinc quality

  • Attachment via mechanical interlock

  • Rapid installation, no setting tool or pre-drilling required, with cordless screwdriver and suitable bit for the relevant screw

  • The drive allows the anchor to be inserted using a PZ, AW or TX bit, as the hexagon head transfers the load

  • Minimal space required behind panel (only 15 mm)

  • The component can be attached with wood screws or chipboard screws

  • The plasterboard plug and the screw can be inserted with the same bit

  • The lathe centre enables easy positioning and drilling into the panel

  • For installation, we recommend the ASSY®-D screw
Notice
  • To attach the component, use the ASSY®-D 4.5 mm ∅ screw or a wood/particle board screw without drill tip, counter thread or ring thread

  • Type Z/L recommended for use on double panelling
Application area

Coat rails
cable ducts
Hand towel rail

Press anchor tips into attachment surface

Screw in anchor until flush

Mount component
Product information

Würth Catalogue

Datasheets(X)

Certificates/ Documents

 | 

 | 

Application area
  • For attaching light components to gypsum plasterboard, gypsum fibreboard and lightweight panels, ideal in combination with the ASSY®-D 4.5 mm ∅ screw

  • Use in damp areas in combination with a stainless steel screw

  • Can be used with every 1/4 inch drive bit

Type description

W-GS/ZD

Anchor length (l)

33 mm

Material

Die-cast zinc

Required particle-board screw diameter

4.5 mm

Hole diameter in component (d Bau)

6.5 mm

Minimum component thickness (d)

9.5 mm

Max. attachment height (d a) - condition

Dependent on screw length

Min. temperature resistance

-40 °C

Max. temperature resistance

80 °C

Edge clearance (a r)

50 mm

Centre-to-centre distance (a)

100 mm

Anchor type Type Z Type Z/L
Thread dia. screw dGew [mm] 4,5 4,5 4.5-5
Hole diameter in component dcon [mm] 6,5

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

Würth Catalogue

Datasheets()

Datasheets ()

CAD data  | 

Certificates/ Documents

 | 

 | 

Technical information
Show all product details