Pull handle ST/A200
Pull handle ST/A200, diameter 30 mm
PULHNDL-A2-ST/A200-MATT-1800MM
Register now and access more than 125,000 products
- The end caps are pressed onto the rod and chamfered, thus no visible effect on appearance
- Fastening is individual or in pairs
Mounting kits, protective rosettes and interior door fittings must be ordered separately.
Dimensions subject to change. Subject to technical changes.
Datasheets(X)
Suitable for plastic, aluminium, wooden and glass doors.
 | |
Suitable for | Wooden doors, Plastic doors, Aluminium doors, Glass doors |
Material | Stainless steel A1, 1.4305 |
Gloss level | Matt |
Length (L) | 1800 mm |
Diameter (Ø) | 30 mm |
Dimension between axes (A) | 1300 mm |
Distance from centre of base to handle end (B) | 250 mm |
Socket diameter | 25 mm |
Socket height | 47 mm |
DIN direction | DIN R/L |
Angle | 90 Degree |
Last viewed
W1 W1 joint bolt clamp
Slide hammer for internal puller with M10 and M14 x 1.5 thread
Spigot hinge 3 pieces
Synthetic corundum flap wheels
1/2 inch socket wrench insert, metric
Collated nails and gas cartridge NG CS-2/3 HFB
Travel bag
Multi-purpose grease IV
WGLG 100 self-igniting gas soldering device
Featheredge, soft handle