Push-in quick-fit plug
SCRINCON-SR-D6-M12X1,5
Art.-no. 088504 62
EAN 4011231817080
Register now and access more than 125,000 products
- Allows quick, simple installation and removal of pipes and hoses.
- Fewer components means fewer potential points of leakage.
- Corrosion-resistant brass design.
- Lower costs through quicker installation and repair.
- Meets international DIN, DOT and SAE regulations.
- Suitable for compressed air as operating medium.
- Reliably maintains maximum operating pressure in accordance with DIN 74324.
- Operates reliably at temperatures of -40 °C to +100 °C. At temperatures below +2 °C, please observe the requirements regarding compressed air quality.
- Compatible with hoses in accordance with DIN 74324.
- A Perbunan O-ring, yellow chromate zinc plated steel banjo bolt and copper sealing washer ensure a reliable connection.
- Features robust brass components, a nickel plated pipe reinforcing sleeve, a multi-tooth clamping ring and a Buna N O-ring (low-nitrile) for reliable sealing.
All pipes, regardless of material, tend to vibrate and move once they reach a certain length. For this reason, secure the brake line pipes (diameter 5 to 16 mm) to the bodywork or chassis with rubberised pipe clamps where possible. Maintain clamp spacing of 1 m to maximum 1.20 m.
- Screw connections meet the requirements of DIN 74324
- Screw connections meet the requirements of the Department Of Transport Federal Motor Vehicle Safety Standard (DOT FMVSS 106) and the Society for Automotive Engineers (SAE J1131)
- Screw connections are TÜV tested and approved for use in pneumatic brake systems
- on commercial vehicles
Datasheets(X)
For polyamide pipes Ø 6 to 16 mm, for connecting components in the pneumatic brake system to commercial vehicles and auxiliary commercial vehicle systems.
Outer diameter of pipe (T) | 6 mm |
Connection thread (D/D1) | M12 x 1.5 |
Length (L) | 30.5 mm |
Material | Steel |
Last viewed
Heat-shrink burner for Turbojet soldering gun
Die stocks DIN 225
Hex head screw with thread up to head ISO 4017, A2-70 stainless steel, plain
Hand tap, third tap HSS DIN 352
1/2" socket wrench insert for TX screws, long
Tape measure
Joint nozzle for AMTS
Thread die HSS DIN EN 22568 for metric ISO fine threads
Tyre profile depth gauge
Mechanic's glove