Soft solder paste no. 30 With brush
Soft solder paste no. 30 with brush
SFTSLDRPAST-NO30-BRUSH-250G
Register now and access more than 125,000 products
- Flux DIN EN 29454-1/3.1.1.C
- Solder S-Sn 97 Cu 3 DIN EN ISO 9453 (content 60% by weight)
- Residues are soluble in cold water
The flux residues are corrosive and must be removed from the outside by wiping and from the inside by flushing.
Datasheets(X)
Ready-to-use soft solder paste for pre-tinning and soft soldering in copper pipe installation in conjunction with fitting solder. Suitable for cold and hot water installations with copper pipes according to DVGW/GW 2 and GW 7
Using the brush, apply the soft solder paste to the surfaces cleaned beforehand with cleaning fleece. Bring the solder joint evenly to the working temperature (approx. 300ºC) and then add the fitting solder. The soldering work can be carried out by means of flame or resistance heating.
Weight of content | 250 g |
Colour | Grey |
Material designation | S-Sn97Cu3 |
Shelf life from production | 24 Month |
EN standard | 29453, 29454-1 |
DIN | 1707, 8511 |
pH value | 7 |
Min. flashing point | 135 °C |
Last viewed
Screwdriver set With hexagon shank and hex bolster for woodwork
PH screwdriver With round shank
Air tool fittings 1500 Series
1/4 inch socket wrench insert, metric short
High-end power LED torch WTX2 and LED head lamp SLA set
Spare part kit For Tornador Gun cleaning and washing appliance
Metric ratchet combination wrench Flexible ratchet head with POWERDRIV®
Power pack LI-CV 18 V with charger and 2 x batteries
PVC packing tape
1/4 inch ratchet With turntable switching