Spigot hinge 3 pieces
Spigot hinge 3 pieces with slidebar
SPGTHNGE-3PRT-SLIDEBAR-ST-(ZNY)-D16
Register now and access more than 125,000 products
Specified dimensions not binding. Subject to technical changes.
Datasheets(X)
 | |
Suitable for | Wooden house doors, Side entrance doors |
Material | Steel |
Surface | Zinc plated yellow |
DIN direction | DIN R/L |
Sliding bearing | Yes |
Roll diameter (A) | 16 mm |
Roll height (B) | 62 mm |
Diameter of tenon (C) | 8.1 mm |
Drilling clearance (D) | 23.3 mm |
Length of tenon on frame part (E1) | 40 mm |
Length of tenon on leaf part (E2) | 51 mm |
Load capacity with 2 hinges | 60 kg |
Min. flashover strength | 16 mm |
Safety catch | No |
Last viewed
2-CUTTER SDS-PLUS HAMMER DRILL BITS Red Stripe
3/8 inch cardan joint
Electrical insulating tape
Stepped twist drill bit assortment HSS blank 3 pieces
Circlip For shafts, standard design, shape A DIN 471, spring steel, phosphated and oiled
Waterproof pin housing TE Superseal 1.5 series
1/2 inch socket wrench insert metric, hexagon, short
Precision engineering set 29 pieces
Cut protection glove W-110 Level B
AW® C 6.3 bit (1/4 inch) with patented AW tip and colour coding