Stop angle Accuracy 1
Try-square DIN 875/1
TRYSQUAR-DIN875-I-150X100MM
Register now and access more than 125,000 products
Made from standard steel DIN 875/1
Very low rectangularity tolerance
Suitable for monitoring and precision work
High edges finely ground and adjusted
Flat sides finely ground and trued
Datasheets(X)
 | |
Thickness (B1) | 6 mm |
Width (B) | 25 mm |
Long-limb dimension (L1) | 150 mm |
Short-limb dimension (L2) | 100 mm |
Last viewed
Abrasive cloth roll 314D 3M
Locking nut DIN 7967 hot-dip galvanised steel
Locking nut DIN 7967 hot-dip galvanised steel
Safety boots, S2 Celle
Useit® Superpad wood sanding disc
Riveted aluminium standing ladder with steps
Pneumatic air push-in tip
Long-life fabric masking tape
Cutting protection glove CUT 4/200 with Kevlar®
HSS twist drill bit assortment 25 pieces