Thread combination set HSCo, multiple through hole M5-M10
Thread HSCo combi set, univ, through hole, 12 pcs
COMBISET-THR-HSCO-UNI-THRGHO-12PCS
ZEBRA
Art.-no.
0659000931
EAN 4056807556833
Prices for customers after login
Exclusively for trade customers
Register now and access more than 125,000 products
12 pieces Compact assortment consisting of MFD Speed core drills, Multi Performance through-hole screw taps, and conical countersinks with extremely uneven pitch for precise thread creation from M5 to M10 in almost all materials, such as stainless steel (e.g. V2A, V4A), heat-resistant steels and titanium. Also for general applications in conventional steel up to a strength of 1,200 N/mm², as well as in cast iron and non-ferrous metals (such as aluminium, aluminium alloys, bronze, plastic).
Twist drill
- Up to 50% faster than conventional, ground twist drills thanks to speed geometry
- 135° tip angle and optimised cross thinning for outstanding centring
- Exclusive Vario coil
- 3-face shank (from Ø 4 mm)
- Available exclusively from Würth
Machine tap
- Flexible use in cordless screwdrivers and hand-held, pillar and upright drills thanks to the additional polygon shaft, which prevents slipping in the drill chuck.
- Suitable for conventional applications, such as in CNC machining centres with collect chucks or compensation chucks, thanks to the retention of the straight shaft with square mount
- Newly developed tool geometry with a reduced rake angle, optimised clearance angle and micro-geometry
- Up to three times longer service life than all uncoated machine taps from Würth
- Excellent chip removal, prevention of chip bird nesting
- Available exclusively from Würth
Conical countersink
- 3-face shank
- Special tip geometry and HSCo cutting material for use with almost all materials
- Best surface quality: precise, round, chatter-free cuts
- Faster processing thanks to higher cutting speeds
- Significantly reduced tool wear
Notice
- For drilling processes, thread cutting, and dipping, sufficient coolant and lubricant must be added.
- For tool/material assignments, see the overview tables
- For further information, please refer to the individual products.
Product information
Datasheets(X)
Instructions
Before reversing the screw tap, the entire spiral point of the tool must be removed from the drill hole. Failure to do so may cause cutting edges to chip or the tool to break.
Number of pieces in assortment/set | 12 PCS |
Material | High-speed steel with 5% cobalt content |
Thread combination set HSCo, multiple through hole M5-M10 including:
1
x
Twist drill bit HSCo DIN 338 MFD Speed
DRL-TWST-MET-DIN338-HSCO-MFDSPEED-D4,2
ZEBRA
Description:
4.2 mm
Manually operated high-speed drill bit for precise drill holes in nearly all materials, such as stainless steel (e.g. V2A, V4A), heat-resistant steels and titanium. Also for general applications in conventional steel up to a strength of 1,200 N/mm² as well as in cast iron and non-ferrous metals (such as aluminium, aluminium alloys, bronze, plastic).
Quantity:
1
x
1
x
Twist drill bit HSCo DIN 338 MFD Speed
DRL-TWST-MET-DIN338-HSCO-MFDSPEED-D5,0
ZEBRA
Description:
5.0 mm
Manually operated high-speed drill bit for precise drill holes in nearly all materials, such as stainless steel (e.g. V2A, V4A), heat-resistant steels and titanium. Also for general applications in conventional steel up to a strength of 1,200 N/mm² as well as in cast iron and non-ferrous metals (such as aluminium, aluminium alloys, bronze, plastic).
Quantity:
1
x
1
x
Twist drill bit HSCo DIN 338 MFD Speed
DRL-TWST-MET-DIN338-HSCO-MFDSPEED-D6,8
ZEBRA
Description:
6.8 mm
Manually operated high-speed drill bit for precise drill holes in nearly all materials, such as stainless steel (e.g. V2A, V4A), heat-resistant steels and titanium. Also for general applications in conventional steel up to a strength of 1,200 N/mm² as well as in cast iron and non-ferrous metals (such as aluminium, aluminium alloys, bronze, plastic).
Quantity:
1
x
1
x
Twist drill bit HSCo DIN 338 MFD Speed
DRL-TWST-MET-DIN338-HSCO-MFDSPEED-D8,5
ZEBRA
Description:
8.5 mm
Manually operated high-speed drill bit for precise drill holes in nearly all materials, such as stainless steel (e.g. V2A, V4A), heat-resistant steels and titanium. Also for general applications in conventional steel up to a strength of 1,200 N/mm² as well as in cast iron and non-ferrous metals (such as aluminium, aluminium alloys, bronze, plastic).
Quantity:
1
x
1
x
HSCo Multi Performance machine tap for through holes DIN 371/376
MATAP-THRGHO-HSCO-DIN371-MULTI-PERFM-M5
ZEBRA
Description:
M5 x 0.8
The high-performance screw tap with the newly-developed generation of shanks (a combination of polygon and straight shank (Ø M4–M12)) for versatile use with almost all machines and materials, such as conventional steels, stainless steels (e.g. V2A, V4A), titanium, heat-resistant and high-strength steels of up to 1200 N/mm² strength and casting materials. Also suitable for non-ferrous metals, such as aluminium, aluminium alloys, bronze and plastics.
Quantity:
1
x
1
x
HSCo Multi Performance machine tap for through holes DIN 371/376
MATAP-THRGHO-HSCO-DIN371-MULTI-PERFM-M6
ZEBRA
Description:
M6 x 1
The high-performance screw tap with the newly-developed generation of shanks (a combination of polygon and straight shank (Ø M4–M12)) for versatile use with almost all machines and materials, such as conventional steels, stainless steels (e.g. V2A, V4A), titanium, heat-resistant and high-strength steels of up to 1200 N/mm² strength and casting materials. Also suitable for non-ferrous metals, such as aluminium, aluminium alloys, bronze and plastics.
Quantity:
1
x
1
x
HSCo Multi Performance machine tap for through holes DIN 371/376
MATAP-THRGHO-HSCO-DIN371-MULTI-PERFM-M8
ZEBRA
Description:
M8 x 1.25
The high-performance screw tap with the newly-developed generation of shanks (a combination of polygon and straight shank (Ø M4–M12)) for versatile use with almost all machines and materials, such as conventional steels, stainless steels (e.g. V2A, V4A), titanium, heat-resistant and high-strength steels of up to 1200 N/mm² strength and casting materials. Also suitable for non-ferrous metals, such as aluminium, aluminium alloys, bronze and plastics.
Quantity:
1
x
1
x
HSCo Multi Performance machine tap for through holes DIN 371/376
MATAP-THRGHO-HSCO-DIN371-MULTI-PERFM-M10
ZEBRA
Description:
M10 x 1.5
The high-performance screw tap with the newly-developed generation of shanks (a combination of polygon and straight shank (Ø M4–M12)) for versatile use with almost all machines and materials, such as conventional steels, stainless steels (e.g. V2A, V4A), titanium, heat-resistant and high-strength steels of up to 1200 N/mm² strength and casting materials. Also suitable for non-ferrous metals, such as aluminium, aluminium alloys, bronze and plastics.
Quantity:
1
x
1
x
EU HSCo 90° countersink DIN 335C
CNTSNK-CONI-EU-HSCO-90DGR-D10,4MM
ZEBRA
Description:
10.4 mm
A Jack of all trades with extremely uneven pitch (EU) for perfect cuts.
Quantity:
1
x
1
x
EU HSCo 90° countersink DIN 335C
CNTSNK-CONI-EU-HSCO-90DGR-D12,4MM
ZEBRA
Description:
12.4 mm
A Jack of all trades with extremely uneven pitch (EU) for perfect cuts.
Quantity:
1
x
1
x
EU HSCo 90° countersink DIN 335C
CNTSNK-CONI-EU-HSCO-90DGR-D16,5MM
ZEBRA
Description:
16.5 mm
A Jack of all trades with extremely uneven pitch (EU) for perfect cuts.
Quantity:
1
x
1
x
EU HSCo 90° countersink DIN 335C
CNTSNK-CONI-EU-HSCO-90DGR-D20,5MM
ZEBRA
Description:
16.5 mm
A Jack of all trades with extremely uneven pitch (EU) for perfect cuts.
Quantity:
1
x
Packaging unit
The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.
Structure of our article number
The article number is made up of the following: VVVVAAABBBVVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2
Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)
Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)
Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
Information on price display
Price per packaging unit (PU):The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.
Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
Quantity
The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).
Last viewed
Hexagon head bolt DIN EN 14399-4, steel 10.9, hot-dip galvanised (hdg), for high-strength structural bolting assembly
TIME-SERT® threaded bushing
Straight-edge From thick-walled light metal profile with middle web and two plastic end caps
HT brake protection
ABS 18 COMPACT M-CUBE cordless drill/driver
Multi high-strength adhesive
Pointed chisel In line with DIN 7256
Side cutters DIN ISO 5749
Sealing tape Indoor Duo flexible
Cetus trousers