Universal SAC clutch tool kit, for self-adjusting clutch, with 3- and 4-point traverse 38 pieces

• In order to avoid premature rotation of the adjustment ring in the clutch pressure plate, there must be no counter-forces during installation


• Depending on the flywheel's hole pitch circle (six or eight screws), the pressure spindle has to be modified using the corresponding spindle carrier


• Use a 3-hole pitch circle on flywheels with 6 mounting threads and a 4-hole pitch circle on flywheels with 8 mounting threads


• Last product update 01/2016

Scope of delivery

• 1 x universal conical sleeve with clamping/centring elements (15 - 28 mm) for holding the clutch disc


• 1 x universal centring pin with guiding and clamping element, 3 pieces


• 7 x mounting centring pins with varying diameters


• 5 x special centring pins (BMW) with varying diameters and appropriate screws


• 1 x pressure spindle, 3 pieces, and 2 x crosspieces with 3- or 4-hole pitch circle


• 1 x pre-tensioner for use on Mercedes Benz


• 4 x mounting bolts M6, M7 and M8


• 4 x knurled nuts