Universal tool set for removal and installation of bushings, bearings and sleeves 40 pieces

• Cost-effective alternative to vehicle-specific tool sets


• All sleeves can be machined and adapted to the application


• All parts are available for purchase individually at a later date


• Includes 20 puller sleeves and pressure sleeves in total, with external diameters ranging from 44 to 82 mm. The sleeves with diameters that increase in 2 mm increments are also ideal for use in a press


• Sleeves have a step on one side, making them stackable and therefore also suitable for particularly long components


• The set offers 4 different feed shafts (L = 450 mm) for varying types of bore in the component


• Minimal friction when driven mechanically due to centring bushes with integrated thrust bearing


• For particularly stuck or rusted-in components, the Würth mechadraulic cylinder 12 t (art. no. 1952004080) or Würth hollow piston cylinder 17 t (art. no. 1952004090) can be used

Scope of delivery

• 20x sleeves (internal diameter 34-72 mm, external diameter 44-82 mm, H = 55 mm)


• 6x sleeve holding plates


• 2x centring bushes with thrust bearings


• 4x spindles (M10 x 1.5; M12 x 1.75; M14 x 2.0; M16 x 2.0)


• 8x pressure nuts (2 x M10; 2 x M12; 2 x M14; 2 x M16)


• 1x high-performance spindle lubricating grease