Wedge anchor W-FC/S non-ETA
Wedge anchor W-FC/S st zn plated Non-ETA approval
ANC-(W-FC/S)-(A2K)-8-23-M12X100
Register now and access more than 125,000 products
For use in medium and heavy duty applications
Single fixing
Anchoring in uncracked concrete (concrete compression zone)
W-FC/S is suitable for dry interior spaces
In-place installation
2 Embedment depths
Available in M8, M10, M12
Can be loaded immediately after installation
Reliable installation
Due to application of prescribed torque moment on anchor
Datasheets(X)
- Suitable for anchoring of metal structures, metal profiles, consoles, footplates, supports, cable trays, pipelines, railings, wood structures, beams, purlins, etc.
- The anchor may be used in concrete with strength C20/25 or below and in some types of masonry units (for example pressure-resistant natural stone)
- The anchor is to be used only for anchorages subject to static (e.g. gravity load) or quasi-static loading (e.g. slowly varying live loads)
Material | Steel |
Surface | Zinc plated |
Anchor diameter | 12 mm |
Longitud del anclaje (l) | 100 mm |
Effective anchoring depth (h ef) | 65 mm |
Nominal drill-bit diameter (d 0) | 12 mm |
Drill hole depth (h 1) | 85 mm |
Max. attachment height (t fix) | 23 mm |
Torque during anchoring (T inst) | 40 Nm |
Last viewed
Safety boot S1P New Poseidon
4 in 1 metric ratcheting double box-end wrench With POWERDRIV® drive
Stretch X softshell jacket
ORSY® hexagon imperial bolts and hexagon imperial nuts UNC/USS grade 5, assortment of 100
O-ring, imperial NBR 70
Wiggle wire
Engine sealing compound, Silicone Special 250
Quick-action coupling with comfort connection series 2000 For Würth PU hoses
Windscreen removal set 9 pieces
Thread mandrel With nozzle