Wheel brush Universal, with sanding bristles, crimped, with shaft
Wheel brush with sanding bristles with shank
WHLBRSH-SHNK-SIC-G320-0,6MM-D50X10MM
Register now and access more than 125,000 products
- The sanding bristles made of elastic polyamide fibres adapt to the contour of the surface and ensure the finest results.
- No or only a small change in the geometry of the workpiece
- The sanding bristles work not only at the tips but also on the sides, thanks to the polyamide fibres interspersed with abrasive grain
- For use on die grinders and drills
- Best surface results are achieved between 8,000 and 10,000 rpm
- Only the bristle tips act on the workpiece. Excessive contact pressure does not improve the result, but increases the required drive power and reduces the service life of the brush.
- Always wear safety goggles and protective gloves when working with machine brushes
- This article 5465440707 features plastic protection to prevent damage to workpieces.
| Instructions for use (optimising brushing results) | ||||
| Measurement | Peripheral speed | Brush diameter | Wire thickness | Bristle length |
| Increase brushing effect | ↑ | ↑ | ↑ | ↓ |
| Reduce brushing effect | ↓ | ↓ | ↓ | ↑ |
| Brush creates ridge | ↓ | ↑ | ↓ |
| Applications | Peripheral speed [in m/s] | Recommended peripheral speeds for brushing | ||||||
| 15 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | |
| Deburring | 25 - 35 | |||||||
| Cleaning welding seams | 35 - 45 | |||||||
| Removing scale | 35 - 45 | |||||||
| Polishing | 30 - 40 | |||||||
| Plastic machining | 15 - 25 | |||||||
Datasheets(X)
- Removal of paint or stains
- Deburring, polishing and structuring
- Wood care
- Ideal edge rounding
 | |
Diameter x usable width x shaft diameter (DxAxS) | 50 x 10 x 6 mm |
Usable length of wire (H) | 12 mm |
Grid size | 320 |
Material of wire | Polyamide fibres with silicon carbide sanding grains |
Surface | 0 - not applicable |
Design | With sanding bristles |
Suitable for cordless drills (points system) | 2 of 4 points |
Suitable for drill (points system) | 2 of 4 points |
Suitable for straight grinder (point system) | 4 of 4 points |
EN standard | 1083-2 |
Max. rotation speed | 15000 rpm |
Last viewed
1/2 inch socket wrench insert metric, hexagon, short
Upholstery nozzle, plug in
System assortment 8.4.1, screwdriver and ratchet key 35 pieces
Assortment of specially fused alumina sanding tips, pink 10 pieces
Connection hose
Plug-in car suction nozzle
Hydraulic manual crimping pliers B12 for wire cable terminals in cases, without crimping jaws
Cetus jacket
Hybrid bomber jacket
Cross-line laser CLG 18