2C HS clear lacquer VOC - CLRLAC-2C-VOC-5LTR

2C HS clear lacquer VOC

Name: 2C HS clear lacquer VOC
Brand: Würth
SKU: 5866200105

2C HS clear lacquer VOC
CLRLAC-2C-VOC-5LTR

Art.-no. 5866200105

All versions

Prices for customers after login

2C HS clear lacquer VOC

Art.-no. 5866200105

Prices for customers after login

Quantity

x 1 pcs

Exclusively for trade customers

Login/Register
Call customer service: +976 76117940

Top-quality, high-solid acrylic clear varnish for complete and partial painting of passenger cars and commercial vehicles.

Brilliant clear varnish condition, optimum application

Perfect polishing immediately after forced drying

VOC-compliant high-solid acrylic varnish

High degree of resistance to all weather influences as well as chemical and mechanical stresses

Also suitable as protective varnish for neon colours (daylight luminous paints)

Notice

Permissible maximum VOC content of product category 2 (d) of the German Ordinance on Solvent-Based Paints and Lacquers (ChemVOC FarbV.): 420 g/l. Max. VOC content of 2-component HS clear lacquer VOC: 420 g/l.

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Product information

Würth Catalogue

Datasheets(X)

Safety data sheet

Certificates/ Documents

Application area

2-component HS clear lacquer VOC is a VOC-compliant high-solid acrylic clear varnish for complete and partial painting of passenger cars and commercial vehicles with an especially brilliant clear lacquer state and optimum development on solvent and water-based paints.

Instructions

Mixture by volume: 2:1 2-component HS hardener for top coats Acrylic thinner: Thinning adjustment 5-10 vol.% depending on layer thickness. Application tools: Spray gun with minimum nozzle diameter of 1.3 mm.

Contents	5 l
Chemical basis	Two-component acrylic
Smell/fragrance	Characteristic
Colour	Colourless
Viscosity/consistency	Liquid
Drying time	30 min
Conditions for drying time	at 20°C
Gloss level	High gloss
Density	1.036 g/cm³
Ignition temperature	370 °C
Max. temperature resistance	120 °C
Density conditions	at 20°C
Min. processing temperature	10 °C
Application conditions	at 10°C and 75% relative humidity
VOC concentration (CH)	263 g/l
Shelf life from production	36 Month
Min. proportion of solids	67 %
Max. proportion of solids	69.5 %
Min. flashing point	36 °C
Boiling point	124 °C
Vapour pressure	1070 Pa
Conditions for vapour pressure	at 20°C
Viscosity conditions	at 20°C, in accordance with DIN 53211
Max. yield (area)	12 m²
Min. yield (area)	10 m²

Required accessory:

Product

Description

Quantity

Price
/PU

Acrylic thinner For 2-component acrylic products and 1-component thick coat lacquers

THINNER-ACRYLIC-NORMAL-5LTR

Art.-no. 08234000

To dilute or to adjust the viscosity of 2-component top coats and 2-component clear coats for painting.

x 1 pcs

2-component HS hardener for top coats

HARD-LAC-TOPCOAT-2C-1LTR

Art.-no. 5866400101

Perfectly suited for use with 2-component HS acrylic paint, 2-component clear varnish and 2-component thick coat lacquer.

x 1 pcs

Packaging unit

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.

Structure of our article number

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Information on price display

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

Quantity

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).

Suitable glove:

Product

Description

Nitrile chemical protective glove With cotton velour finish inside

Description:

Permeation level: 1

Permeation is the process by which a chemical moves through the material of a protective glove on a molecular level. The time from the initial contact between the chemical and the glove to the permeation of the material is the breakthrough time.

Measured breakthrough time

Permeation level

< 10 min

≥ 10 min

≥ 30 min

≥ 60 min

≥ 120 min

≥ 240 min

≥ 480 min

Important information:

The information given is based on experience and laboratory conditions and is designed as a guide. However, the actual suitability of a glove depends on the individual conditions of its use and must be confirmed by an appropriate test under operational conditions. Given the variety of materials and chemicals used, the possibility of incompatibility or usage problems for the wearer cannot be excluded in individual cases. We would be happy to advise you about optimum solutions.